Hi,
Currently the latest version of BPM is 9.23 and the highest VuGen version it support is VuGen 11.52.
You can find additional information in the following post:
I agree with KMadan that the best place to post your BPM related questions and receive an answer from the experts in this area is Application Performance Manager (BAC/BSM) forum.
Kind regards,
Hi Patrick,
Please check the following knowledge documents:
Error: "Run test failed. Reason: The request channel timed out while waiting for a reply after... Increase the timeout value..."
http://support.openview.hp.com/selfsolve/document/KM00363317
Initializing a test in performance center fails during the "Load LTOM to Controller" step
http://support.openview.hp.com/selfsolve/document/KM00522214
For PC 11 please review:
Error:" Run test failed. Reason: 'The request channel timed out while waiting for a reply after 00:10:00. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted to this operation may have been a portion of a longer timeout.'"
http://support.openview.hp.com/selfsolve/document/KM1199022
Kind regards,
Hi Raj,
As you are a customer with valid HP contract I would suggest you to post in LoadRunner Support Customer Forum where the questions are answered with priority.
Additionally if the issue in a case is not resolved you can always reopen the case or open a new one by referring to the old case ID.
Regarding the Raw Data does not show problem, in LoadRunner 11.52 User Guide under the Viewing Raw Data chapter is stated “The Raw Data view is not available for all graphs.” For example it is not available for merged graphs.
Could you please specify:
1. for which graph or graphs you are trying to get the raw data and
2. if you see “No data available”
a) in Raw Data Pane for a specific graph or
b) after clicking on “Click to retrieve raw data” as described in the following document Error: "No raw data available for this graph" error message is displayed for Oracle graph in Analysis 11.52 patch 1
http://support.openview.hp.com/selfsolve/document/KM00780372
Kind regards,
The documentation provided clearly states that the working directory should be set to he working directory of the application along with this from the help menu: "A working directory is necessary only if your application must know the location of the working directory (for example, reading property files or writing log files)."
The application is looking for property files, writing logs which are all located on the unix server.
Why would it be the the LR directory?
I am trying to perform Performance Testing of an application that is bulit on .Net 3.5 version.
However, on performing the Analyse Application operation, the expected window is not appearing.
The application is Windows application and I am launching it through the .exe.
Could anyone please help me into this?
Also to add to my query, I am using VuGen 11.5.
Hi Guys,
I'm new to Load Runner and i have some basic questions. Please provide your suggestions!!!
1. why we are using various protocols when recording script?
2. How should we decide our application support specific protocol?
3. what are all the best practices that we need to follow at the time of scripting in VuGen?
Thanks,
Karthik
Thank you so much for your answer.
Duy
Hello,
As part of a LoadRunner trial (I recently downloaded LoadRunner 12 trial version), I'm trying to use a Linux server as a load generator.
The install documentation says:
- Change directory to /<installation root directory>/InstData/Linux/VM.
- Launch the setup wizard by typing: source ./installer.sh.
However:
- path InstData/Linux/VM does not exist in the LR 12 Trial installer
- there's no "./installer.sh" file to execute in the install folders I downloaded,
- when I click on "Load Generator" in the main install menu, nothing happens (while LR full install works fine)
The question is: is it possible to set up a Unix/Linux Load Generator with the trial version of LoadRunner 12?
If yes, could you please let me know how to do this?
Thank you for your help!
Regards,
Alexis
Hi Expert,
IS Load runner support Weblogic 10.3.5.0 version to test EJB using EJB Protocol?
Our Web Application server is Weblogic 10.3.5.0.
any help on this will be appriciated.
Trying to run EJB Detector on Application server, it is running but can't detect any ejb. getting message "Founb 0 EJB ."
Need help on proper environment setup for ejb detector on weblogic 10.3.5 version.
thanks
Hello Experts,
I have designed the scenario like the below.
Total No. Of Users: 202
Scenario Designed as below:
1. Ramp Up: 50 Users 6users every 10 sec’s and run 50 Users 15 Min's
2. Ramp Up: 50 Users 6users every 10 sec’s and run 50 Users 15 Min's
3. Ramp Up: 50 Users 6users every 10 sec’s and run 50 Users 15 Min's
4. Ramp Up: 52 Users 6users every 10 sec’s and run 50 Users 2 hours
Here test will run in steady state for 2hrs for 202 Users
5. Stop the users: 50 Users 6users every 10 sec’s and run 50 Users 15 Min's
6. Stop the users: 50 Users 6users every 10 sec’s and run 50 Users 15 Min's
7. Stop the users: 50 Users 6users every 10 sec’s and run 50 Users 15 Min's
So, now I have to pause the test between the users like the below
1. Ramp Up: 50 Users 6users every 10 sec’s and run 50 Users 15 Min's
Pause
2. Ramp Up: 50 Users 6users every 10 sec’s and run 50 Users 15 Min's
Pause
3. Ramp Up: 50 Users 6users every 10 sec’s and run 50 Users 15 Min's
Pause
4. Ramp Up: 52 Users 6users every 10 sec’s and run 50 Users 2 hours
Here test will run in steady state for 2hrs for 202 Users
5. Stop the users: 50 Users 6users every 10 sec’s and run 50 Users 15 Min's
6. Stop the users: 50 Users 6users every 10 sec’s and run 50 Users 15 Min's
7. Stop the users: 50 Users 6users every 10 sec’s and run 50 Users 15 Min's
Basically the idea is : as soon 50 users finished their duration, they should not create any transaction until all the 202 users reached and then again all 202 users should start creating the transaction for 2 hrs steady state
Could someone please tell me how to do that?
Thanks,
Raj
Have you every tried the Rendezvous?
Hi
I heard never ever should try Rendezvous
Thanks,
Raj
Hi Raj,
Try inserting Rendezvous ponit in the controller. The steps to enable/disable Rendezvous points are:
1) Open the controller scenario
2) Select the menu option scenario -> Rendezvous
3) Rendezvous Information dialog box opens
4) Select the name of Rendezvous point
5) Click on Enable (or Disable) Rendezvous button
Thanks
Renjith
The application uses different protocols to contact with the server, for example, browsers use http protocol to contact with the server. Sometimes one application may use more than one protocols to contact with the servers.
LoadRunner will use the same protocols to simulate the pressure to the server, for example, a lot of http requests to simulate the load to a web server.
If you are not sure about the which protocol should be used, just try to use the protocol adviser. It will detect the protocol used in the application.
Your last question is hard to answer, you need to know some programming skills when working on the scripts, and different protocol may need different knowledge. First you should know which protocol you need to work on, then narrow down your scope of learning.
Hi Karthik,
In addition to JerryYin reply I would like to add that you can find a short protocol description in Create a new Script window which can be useful when you choose a protocol.
Image may be NSFW.
Clik here to view.
More detailed information for each protocol is available in LoadRunner user guides
As you are new to LoadRunner you can find a lot of useful information in http://www8.hp.com/us/en/software-solutions/loadrunner-load-testing/demos-documents.html#pd1=1_16_7_11_13
It contains: Demos, Videos, Technical Videos and sample courses for HP LoadRunner 11.5 and HP VuGen 11.5 under education & training > Take a Test Drive of HP Adoption Readiness Tool (ART) for LoadRunner.
Kind regards,
Hi Alexis,
With the Community Edition (trial version) of LoadRunner 12 you can make only full LoadRunner 12 insallation.
Kind regards,
Hi,
Please ask your question as a new post by clicking on the new post button in the forum main window.
Image may be NSFW.
Clik here to view.
Kind regards,
This helped us. Thanks!
Hi Renjithrajan,
If I follow the steps which you mentioned, am i able to reach what I smentioned as below.
So, now I have to pause the test between the users like the below
1. Ramp Up: 50 Users 6users every 10 sec’s and run 50 Users 15 Min's
Pause
2. Ramp Up: 50 Users 6users every 10 sec’s and run 50 Users 15 Min's
Pause
3. Ramp Up: 50 Users 6users every 10 sec’s and run 50 Users 15 Min's
Pause
4. Ramp Up: 52 Users 6users every 10 sec’s and run 50 Users 2 hours
Here test will run in steady state for 2hrs for 202 Users
5. Stop the users: 50 Users 6users every 10 sec’s and run 50 Users 15 Min's
6. Stop the users: 50 Users 6users every 10 sec’s and run 50 Users 15 Min's
7. Stop the users: 50 Users 6users every 10 sec’s and run 50 Users 15 Min's
Thanks,
Raj
